top of page


Public·32 members

Path Too Long Pro Utility Serial

Click Here --->>>

B. Select the Drives to TestAfter SeaTools loads, the screen will list the different storage devices in your system. Select the drive you would like to test by making a check mark in the box next to the drive information. This screen also displays information about the drives such as the Model Number and Serial Number. Seagate model numbers begin with the letters "ST". Seagate serial numbers are alphanumeric and eight characters long.However, Seatools for Windows often displays the serial number and even the model number of the internal drive inside the external case, and these numbers do not correspond to the numbers that Seagate assigns to the external unit as a whole. (For help on finding the model number of a drive, please see our "Find Your Model and Serial Numbers" Knowledge Base article.)Seagate, Samsung, LaCie and Maxtor drives models are given a gold drive icon. Non-Seagate drives have a silver drive iconYou may select more than one drive at a time to test them simultaneously.

Hercules SETUP utility is useful serial port terminal (RS-485 or RS-232 terminal), UDP/IP terminal and TCP/IP Client Server terminal. It was created for HW group internal use only, but today it's includes many functions in one utility and it's Freeware! With our original devices (Serial/Ethernet Converter, RS-232/Ethernet Buffer or I/O Controller) it can be used for the UDP Config.

The "port lookup" function only works with virtual COM ports, such as USB-to-serialcables. Since Microsoft Windows has drivers pre-installed for USB devices simulatinga serial port, it is a popular design. To use the port lookup function,put the complete device name of the virtual COM port at the "Port="setting. You can find the device names in the registry below the path"HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\SERIALCOMM".For example, for a common Prolific USB-to-serial cable, the setting in the INIfile might read:

In case Termite is not what you are looking for, some alternatives are:The Serial Port Monitorby Eltima Software has the ability to sniff communication from another program(without requiring a special cable) and the ability to monitor multiple serialports at the same time. Serial Port Monitor handles RS485/422 as well as RS232,and supports Modbus RTU and Modbus ASCII protocols.The HyperTerminal applet that comes with Microsoft Windows, or the third-partyHyperTerminal Private Edition.MCS Electronics providesthe free "simpleterm" utility amongst its downloads. (Choose "Downloads", then"BASCOM". Then select the "MCS Simple Terminal" from the list.)YAT, two freewareserial terminals are listed on the site of LakeviewResearch: a small and simple terminal by Dieter Fauth and a full-featuredterminal by Maettu."Terminal" by Br@y++, a free terminal that supports text and hexadecimaldisplay, macros, scripting, graphic visualization and more."Termie",which started as an open-source clone of Termite, but now has some features thatTermite lacks, while lacking some of Termite's features.

Use this utility to change the STU to serial VCP mode. No parameters are required.You can verify that the STU is in serial mode by viewing the serial ports with getSerialPorts.exe.Verify the connection using query.exe: 1e1e36bf2d


Welcome to the group! You can connect with other members, ge...

Group Page: Groups_SingleGroup
bottom of page